# -*- coding: utf-8 -*-
# Licensed under a 3-clause BSD style license - see LICENSE.rst
"""
This module contains utility functions for working with angles. These are both
used internally in astropy.coordinates.angles, and of possible
"""
__all__ = ['angular_separation', 'position_angle', 'offset_by',
'golden_spiral_grid', 'uniform_spherical_random_surface',
'uniform_spherical_random_volume']
# Third-party
import numpy as np
# Astropy
import astropy.units as u
from astropy.coordinates.representation import (
UnitSphericalRepresentation,
SphericalRepresentation)
[文档]def angular_separation(lon1, lat1, lon2, lat2):
"""
Angular separation between two points on a sphere.
Parameters
----------
lon1, lat1, lon2, lat2 : `~astropy.coordinates.Angle`, `~astropy.units.Quantity` or float
Longitude and latitude of the two points. Quantities should be in
angular units; floats in radians.
Returns
-------
angular separation : `~astropy.units.Quantity` ['angle'] or float
Type depends on input; ``Quantity`` in angular units, or float in
radians.
Notes
-----
The angular separation is calculated using the Vincenty formula [1]_,
which is slightly more complex and computationally expensive than
some alternatives, but is stable at at all distances, including the
poles and antipodes.
.. [1] https://en.wikipedia.org/wiki/Great-circle_distance
"""
sdlon = np.sin(lon2 - lon1)
cdlon = np.cos(lon2 - lon1)
slat1 = np.sin(lat1)
slat2 = np.sin(lat2)
clat1 = np.cos(lat1)
clat2 = np.cos(lat2)
num1 = clat2 * sdlon
num2 = clat1 * slat2 - slat1 * clat2 * cdlon
denominator = slat1 * slat2 + clat1 * clat2 * cdlon
return np.arctan2(np.hypot(num1, num2), denominator)
[文档]def position_angle(lon1, lat1, lon2, lat2):
"""
Position Angle (East of North) between two points on a sphere.
Parameters
----------
lon1, lat1, lon2, lat2 : `~astropy.coordinates.Angle`, `~astropy.units.Quantity` or float
Longitude and latitude of the two points. Quantities should be in
angular units; floats in radians.
Returns
-------
pa : `~astropy.coordinates.Angle`
The (positive) position angle of the vector pointing from position 1 to
position 2. If any of the angles are arrays, this will contain an array
following the appropriate `numpy` broadcasting rules.
"""
from .angles import Angle
deltalon = lon2 - lon1
colat = np.cos(lat2)
x = np.sin(lat2) * np.cos(lat1) - colat * np.sin(lat1) * np.cos(deltalon)
y = np.sin(deltalon) * colat
return Angle(np.arctan2(y, x), u.radian).wrap_at(360*u.deg)
[文档]def offset_by(lon, lat, posang, distance):
"""
Point with the given offset from the given point.
Parameters
----------
lon, lat, posang, distance : `~astropy.coordinates.Angle`, `~astropy.units.Quantity` or float
Longitude and latitude of the starting point,
position angle and distance to the final point.
Quantities should be in angular units; floats in radians.
Polar points at lat= +/-90 are treated as limit of +/-(90-epsilon) and same lon.
Returns
-------
lon, lat : `~astropy.coordinates.Angle`
The position of the final point. If any of the angles are arrays,
these will contain arrays following the appropriate `numpy` broadcasting rules.
0 <= lon < 2pi.
"""
from .angles import Angle
# Calculations are done using the spherical trigonometry sine and cosine rules
# of the triangle A at North Pole, B at starting point, C at final point
# with angles A (change in lon), B (posang), C (not used, but negative reciprocal posang)
# with sides a (distance), b (final co-latitude), c (starting colatitude)
# B, a, c are knowns; A and b are unknowns
# https://en.wikipedia.org/wiki/Spherical_trigonometry
cos_a = np.cos(distance)
sin_a = np.sin(distance)
cos_c = np.sin(lat)
sin_c = np.cos(lat)
cos_B = np.cos(posang)
sin_B = np.sin(posang)
# cosine rule: Know two sides: a,c and included angle: B; get unknown side b
cos_b = cos_c * cos_a + sin_c * sin_a * cos_B
# sin_b = np.sqrt(1 - cos_b**2)
# sine rule and cosine rule for A (using both lets arctan2 pick quadrant).
# multiplying both sin_A and cos_A by x=sin_b * sin_c prevents /0 errors
# at poles. Correct for the x=0 multiplication a few lines down.
# sin_A/sin_a == sin_B/sin_b # Sine rule
xsin_A = sin_a * sin_B * sin_c
# cos_a == cos_b * cos_c + sin_b * sin_c * cos_A # cosine rule
xcos_A = cos_a - cos_b * cos_c
A = Angle(np.arctan2(xsin_A, xcos_A), u.radian)
# Treat the poles as if they are infinitesimally far from pole but at given lon
small_sin_c = sin_c < 1e-12
if small_sin_c.any():
# For south pole (cos_c = -1), A = posang; for North pole, A=180 deg - posang
A_pole = (90*u.deg + cos_c*(90*u.deg-Angle(posang, u.radian))).to(u.rad)
if A.shape:
# broadcast to ensure the shape is like that of A, which is also
# affected by the (possible) shapes of lat, posang, and distance.
small_sin_c = np.broadcast_to(small_sin_c, A.shape)
A[small_sin_c] = A_pole[small_sin_c]
else:
A = A_pole
outlon = (Angle(lon, u.radian) + A).wrap_at(360.0*u.deg).to(u.deg)
outlat = Angle(np.arcsin(cos_b), u.radian).to(u.deg)
return outlon, outlat
[文档]def golden_spiral_grid(size):
"""Generate a grid of points on the surface of the unit sphere using the
Fibonacci or Golden Spiral method.
.. seealso::
`Evenly distributing points on a sphere <https://stackoverflow.com/questions/9600801/evenly-distributing-n-points-on-a-sphere>`_
Parameters
----------
size : int
The number of points to generate.
Returns
-------
rep : `~astropy.coordinates.UnitSphericalRepresentation`
The grid of points.
"""
golden_r = (1 + 5**0.5) / 2
grid = np.arange(0, size, dtype=float) + 0.5
lon = 2*np.pi / golden_r * grid * u.rad
lat = np.arcsin(1 - 2 * grid / size) * u.rad
return UnitSphericalRepresentation(lon, lat)
# # below here can be deleted in v5.0
from astropy.utils.decorators import deprecated
from astropy.coordinates import angle_formats
__old_angle_utilities_funcs = ['check_hms_ranges', 'degrees_to_dms',
'degrees_to_string', 'dms_to_degrees',
'format_exception', 'hms_to_degrees',
'hms_to_dms', 'hms_to_hours',
'hms_to_radians', 'hours_to_decimal',
'hours_to_hms', 'hours_to_radians',
'hours_to_string', 'parse_angle',
'radians_to_degrees', 'radians_to_dms',
'radians_to_hms', 'radians_to_hours',
'sexagesimal_to_string']
for funcname in __old_angle_utilities_funcs:
vars()[funcname] = deprecated(name='astropy.coordinates.angle_utilities.' + funcname,
alternative='astropy.coordinates.angle_formats.' + funcname,
since='v4.3')(getattr(angle_formats, funcname))